Adjust Low Frequencies
Adjust low frequencies online for free. Regulate the low frequency level in your audio file for a perfect sound balance. Configure depth and frequency band. No registration, fully browser-based.
About Adjust Low Frequencies
Adjust low frequencies online to get the balance of the bottom end right — whether that means more depth or less boom. The editor highlights the three low-frequency bands, 60 Hz, 170 Hz and 310 Hz, and starts with a moderate lift (+8 / +6 / +2 dB). From there you can move each band anywhere between −12 and +12 dB, so the same page works for adding weight and for cleaning up excess low end.
Low frequencies decide whether a recording sounds full or thin, warm or muddy. A voice recorded in a small room often has too much around 170–310 Hz; a home-made beat may lack energy at 60 Hz; a live recording can have both problems at once. Adjusting the bands one by one while listening is the quickest way to find the right low-frequency balance.
Everything runs in your browser, with real-time preview and no uploads. Export as MP3 (128–320 kbps) or WAV.
How to adjust low frequencies in an audio file
- Upload an audio file in MP3, WAV, OGG, FLAC, AAC or M4A format.
- Press Preview. If the sound is already too heavy, click the Flat preset to start from zero.
- Adjust 60 Hz (depth), 170 Hz (fullness) and 310 Hz (warmth/mud) one at a time while listening.
- Seek to the busiest part of the track to check the balance where it matters most.
- Click "Apply & Download" and save as MP3 or WAV.
Low frequency range explained: 60, 170 and 310 Hz
Low frequencies roughly span 20–300 Hz. The 60 Hz band covers the deep end: sub-bass, kick drum thump, the hum of large engines. You feel it more than hear it, and many small speakers cannot reproduce it at all. The 170 Hz band covers the fundamental notes of bass guitar and the lower range of male voices — this is the "fullness" of a mix.
The 310 Hz band is the upper edge of the low range. A little energy here sounds warm; too much sounds muddy, boxy or like a cardboard tube. Because the three bands overlap smoothly, moving one also nudges its neighbours slightly, which keeps adjustments musical rather than abrupt.
Thin or boomy? How to balance the low end
If the audio sounds thin, raise 170 Hz first — it adds body on every playback device. Add 60 Hz only if the track will be heard on headphones, car audio or speakers with a subwoofer. If the audio sounds boomy, the problem is usually 170 Hz combined with 310 Hz: lower 310 Hz by 3–5 dB, then decide whether 170 Hz needs a small cut too.
A good habit is to make one move at a time and compare it with the Flat preset. Low-frequency changes are easy to overdo because our ears adapt quickly. If a boost causes crackling on loud passages, reduce it — the editor does not apply a limiter, so overshooting peaks are clipped on export.
Similar Audio Tools
Volume Leveling
Level audio volume online for free. Make quiet parts louder and loud parts quieter. Dynamic compression with presets for podcasts, music, and voice. No registration, fully browser-based.
OpenIncrease Audio Volume
Increase audio volume online for free. Boost your audio file up to 300% with a slider or presets and preview the result. Clipping warning at high gain. No registration, fully browser-based.
OpenDecrease Audio Volume
Decrease audio volume online for free. Lower the sound level of your audio file with a slider or 25%, 50%, 75% presets. Preview the result before saving. No registration, fully browser-based.
OpenSpeed Up Audio
Speed up audio online for free. Increase the playback speed of your audio file from 1.25x to 4x for a sped-up effect. Perfect for podcasts and audiobooks. No registration, fully browser-based.
OpenSlow Down Audio
Slow down audio online for free. Decrease the playback speed from 0.75x to 0.25x for a slowed effect. Perfect for music learning and transcription. No registration, fully browser-based.
OpenAudio Equalizer
Audio equalizer online for free. Adjust audio frequencies with a multi-band equalizer: bass, mid, and treble. Presets for music, podcasts, and voice. No registration, fully browser-based.
OpenOther Audio Tools
Trim Audio
Trim audio online for free. Select the start and end of a fragment precisely to 1/100 s, view the waveform, and preview the result before saving. No registration, fully browser-based.
OpenAudio Converter
Audio converter online for free. Convert MP3, WAV, OGG, FLAC, AAC and M4A files to MP3 or WAV. Adjust bitrate, sample rate and channels. No registration, fully browser-based.
OpenExtract Audio from Video
Extract audio from video online for free. Upload an MP4, AVI, MOV, or MKV video file and get the audio track as MP3 or WAV. No registration, fully browser-based.
OpenConvert Video to Audio
Convert video to audio online for free. Transform video files into MP3 or WAV audio in seconds. Supports MP4, AVI, MOV, WebM. No registration, fully browser-based.
OpenMerge Audio
Merge audio online for free. Combine multiple audio files into one track, and join them back to back in the order you add them. No registration, fully browser-based.
OpenAudio Info
Audio info online for free. Find out the format, bitrate, sample rate, duration, number of channels, and file size of your audio. No registration, fully browser-based.
OpenWhat Our Users Say
Trusted by creators and professionals worldwide
“Audio editor — tweaked the EQ on my mix and it sounds professional. Great browser-based tool!”
David Brown
Producer“Sound processing — boosted the treble in my vocal track. My voice sounds brighter and cleaner!”
Sophia Garcia
Vocalist“Audio online free — adjusted bass and frequencies in my mix. Great results in one minute!”
Zoe Mitchell
DJ“Adjusted the equalizer — sound became cleaner. Removed muddiness and added brightness to my mix.”
Robert Taylor
Producer“Boosted the bass in my track — it hits hard now! Low frequencies are deep and rich.”
Emily Watson
Musician“Tuned frequencies for my headphones — the sound is now balanced and pleasant to listen to.”
Samantha Cruz
DJFrequently Asked Questions
Boosting bass is one direction only — more low end. Adjusting low frequencies means balancing them: some recordings need more 60 Hz but less 310 Hz, others need less of everything. This page highlights the same three bands but is meant for both boosting and cutting.
Try 310 Hz first. Muddiness usually comes from the 200–400 Hz region, where many instruments and voices overlap. A cut of 2–5 dB often clears the sound without making it thin. If it is still boomy, lower 170 Hz slightly.
Most phone and laptop speakers cannot reproduce 60 Hz, so changes there are inaudible on them. Listen on headphones or larger speakers, or work with the 170 Hz band, which is audible on almost any device.
Yes. The Flat preset sets all bands to 0 dB, which is the original sound. Reset returns to this tool's starting low-frequency curve.
Yes. The bars can be dragged with a finger, and the processing uses the browser's built-in Web Audio API on Android and iOS. Very long files need more memory, so on older phones shorter files process faster.
Ready to Use Adjust Low Frequencies?
Upload audio and process it instantly — free and private